These CD-ROM drivers work in VMware, Virtual PC, and work on most IDE CD-ROM drives. To write this to a floppy, you will need WinImage. To start the installation, either mount the floppy in VMware/Virtual PC or insert the floppy in the drive. Type A: , then type 'cdsetup' no quotes. Your CD-ROM will become D: if you have one hard drive that has one partition.

These bootdisks were created by a member here known as 'Mr. Bird Poo'. The Windows 98, Windows 98 SE, and Windows Me ones have PKzip included. All of them have mouse support and Read-Only NTFS support. These will work on Windows 95 A, B, C, Windows 98, Windows 98 SE, and Windows Me.

These drivers let you take advantage of your network in Windows for Workgroups 3.1 and 3.11. Included are Microsoft LanMan drivers, and a few extras. These drivers are for a DEC 21104a network adapter. This is the type of adapter that Virtual PC emulates. This driver DOES NOT work in VMware.

These drivers let you use resolutions from 640x480 with 16.7 million colors to 1280x1024 with 16.7 million colors. You MUST install these drivers in the MS-DOS portion of Setup, not in Windows. To install these drivers, you must use a Custom install, and when it shows the hardware summary, select the Video section and choose Unlisted or Updated Driver. Mount this image in Virtual PC and specify A:\ as the path.